| 翻訳と辞書 |
| BMW 5 Series (E12) ： ウィキペディア英語版 |
BMW 5 Series (E12)
The BMW E12 BMW 5-Series was made between 1972 and 1981. The E12 was the first series to bear the 5 Series name: the '5' denoting BMW's fifth 'New Class' platform. Designed as a replacement for the popular BMW New Class mid-size sedan, the E12 5-Series models were smaller than the large BMW E3 sedan but larger than the two-door 2002 models. The E12 was replaced by the BMW E28 5 Series in 1981, although production continued until 1984 in South Africa. While commending for its acceleration and build-quality, the mid-70s 5-series was criticised for its "untidy" handling, being prone to sudden and sharp oversteer. Steering corrections during cornering meant the car´s body "lurches back annoyingly and messily",〔Car, November 1975, page 60.〕 in part due to the soft springing and hard damping combination. In comparison to the Jaguar XJ3.6 and Peugeot 604, the car was viewed as narrow and cramped in the rear and prone to wind noise.〔Car, November 1975, page 60〕
== Styling and features ==
The 1970 BMW 2200ti Garmisch show car designed by the Bertone Design Centre set the style for the E12 5-series,〔http://www.allcarindex.com/auto-car-model/Germany-BMW-2200-TI-Garmish/〕 with the final design created by BMW designer Paul Bracq. Designed to compete with the Mercedes-Benz W114 sedans, the E12 models were fitted with a variety of engines. 1.8 L and 2.0 L M10 I4 engines from the older Neue Klasse sedans were used in the 518 and 520, respectively. A six-cylinder version of the 520, built with a 2.0 L M20 belt-driven engine was also available from 1977 on (to coincide with the minor restyling). The 525i, 528i, 530i, and M535i, were fitted with M30 six-cylinder engines as used on the large ''E3'' sedans and ''E9'' coupes. With the exception of the 520i, four-cylinder and 2.0 L six-cylinder engines were fitted with Solex carburetors (although in the UK the four-cylinder 520 was fitted with twin Stromberg 175CDET carburettors). The 520i used the mechanical fuel injection system (Kugelfischer) from the BMW 2000tii and BMW 2002tii. Six-cylinder versions were available with dual Zenith two-barrel carburetors or Bosch L-jetronic fuel injection. Fuel-injected models contain the ''i'' letter at the end of their model badge. Although BMW had always located turn signal stalks on the right hand side of its steering wheels, the E12 was their first model to have the stalk on the left side.
The E12 was face lifted in September 1976. Bigger rear lights, a relocated fuel filler flap on the rear wing, reprofiled bonnet and grille were the main changes as well as a single four barell Solex 4A1 DVG carburettor on the 525 and 528. Kugelfischer injection on the 520i was replaced by Bosch K Jetronic. A six-cylinder 520 was launched in late 1977 with the new M20 1990 cc six cylinder carburettor (Solex 4A1 DVG) engine, replacing the four cylinder 520 and 520i. This engine was initially coded M60 was recoded M20 in mid 1981 for the new M20. The 528 was replaced by the injection 528i in September 1977.
With the introduction of the BMW E23 large sedan in 1977, the E12 received a minor restyling. The rear-mounted gasoline filler door was relocated to the side of the car and the taillights were widened. The hood, originally designed to clear the large air filter assembly for cars fitted with dual Zenith carburetors, was redesigned to a give a 'power bulge', and the dashboard ventilation was repositioned to improve air distribution.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「BMW 5 Series (E12)」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|